Congratulations! You have now purchased the finest AZ-EL mount available. This unit has been designed to give you the most stable system to work on
Installation Photos: Additional Help for Installing by Sections to the Ring Continue to page 6B for section by section inst
“OPTIONAL ASSEMBLY METHOD” (Install By Sections: Using 2-3 People) Assemble mount and put mount in birdbath position. Be sure to lock the mount w
Preparing the Mount to Receive the Antenna------------ Now that the mount is assembled, it is time to install the antenna. You must first eleva
Assembling & Installing the Back Brace---- There are eight holes around the rear of the 60" ring to accept the braces. First install the
Fine Tuning the Antenna----------- To get the most gain from your antenna, take an extra hour to make the adjustments needed and if possible use a
Preparing the C Band Feed Assembly------ Antenna Size Focal Length Focal Distance 10' (3.0m) 36"
Heavy Duty Feed Struts (Chaparral & Seavey Type) ---- We have developed a new feed strut and collar for the heavier 4 Port Seavey and Chaparr
See above: Ku4FL: This feed assembly is for a Ku band feed. This feed assembly can also be used as a C14f (for a C band feedhorn by removing the f
Figure #13 Heavy Duty Feed Strut________________________ We have developed a new feed strut and collar for the heavier 4 Port Seavey feed assem
ADDITIONAL FINE TUNING TECHNIQUES To receive the optimum from your antenna, you must take time to fine tune the antenna. What are the antenna adjustme
------IMPORTANT!------ PLEASE HANDLE THE ANTENNA VERY CAREFULLY If you have purchased a 36" F/L Antenna 3.0m or 3.3m follow the directions
BOLT BAG FOR: THE STANDARD AZ-EL MOUNT C24F SEAVEY C & KU FEED ASSEMBLY AND STRUTS 1- Set of 4 Struts 1- Collar (C, Ku) 12 - 5/16” Lock Wash
SHIPPING WARRANTY Effective 11-17-97 CONGRATULATIONS!!! You have obtained one of the best antennas on the market today! We hope that you will be ha
2) AZ-EL Mount 4.5m Fixed HD Az-El requires a 6 5/8” OD post to be installed with special pad design from
Installation of Base Post Look at the drawing below. The drawing shows the recommended concrete base for the 3.7m antenna. The actual base pad size wi
2) Installation of Base for the Four Leg Base Stand (continued) The second base assembly is our
Assembling the Ring to the Base------- Assembling the AZ-EL Mount is very easy (familiarize yourself with Figure #3), as there are only four part
Assembly of the 2 Piece Antenna with Joiner Strips At this time the antenna will come in either one or two pieces when using the standard AZ-El mount
ASSEMBLY OF THE ANTENNA (On Ground: Lift As One Piece) FIG. #9 FIG. #10 Page 6A See optional sectional installation on page
Installation Photos: Additional Help for Installing by Sections to the Ring Continue to page 6B for section by section ins
Comments to this Manuals